loader image

    Stay In Touch

    6.6kw Solar System

    Generating Clear Energy With 6.6kW Solar System

    At Sunray Power, we recognise your desire to move away from the grid and use renewable energy. It is where our 6.6kW solar system, a strong and adaptable solution made to accommodate the requirements of numerous homes, comes in. A 6.6kW system boasts a capacity of generating 6.6 kilowatts of electricity, which is equivalent to approximately 24–30 kWh per day. It results in substantial electricity bill savings, particularly when location and sun exposure are taken into account. The 6.6kW system is the ideal combination of power generation, space requirements, and pricing. It's especially useful for average-energy-consuming homes, as it can balance a significant amount of your electricity consumption. A typical 6.6kW system from Sunray Power will include:
    • Solar Panels: Typically, 17-20 high-efficiency solar panels, ranging from 330 watts (W) to 400W each, will be used. These panels convert sunlight into usable electricity.
    • Inverter: This crucial component transforms the Direct Current (DC) electricity produced by the panels into Alternating Current (AC) electricity compatible with your home's appliances. Depending on your needs, an 8kW or 10kW inverter might be recommended.
    Solar Panel
    • 16 X 415W Highly efficient panels
    • Newly built half-cut solar panels
    • Excellent performance
    • 25 year warranty
    Solar Inverter
    • 1 X 5kW High-quality inverter
    • Apps for online monitoring (optional)
    • Backup support and the best warranty
    • Installed with IP65 (Indoor/outdoor) use
    Solar Installer
    • CEC-Accredited installer
    • Best-quality electrical material
    • Aluminum racking system that is resistant to corrosion
    • Best service and support
    • Should I pair a 6.6kW solar system with a battery?
      A 6.6kW solar PV module is a great choice to pair it with a battery. You can enjoy more benefits if you have an EV vehicle or planning to buy one. A 5kW inverter used with a 6.6kW system is not as expensive as a 6kW inverter.
    • How much roof space do I need for a 6.6kW solar system?
      Each panel typically measures out to 1.7 m2, thus a 6.6 kW system will need a roof space of 34 to 38 m2. It also depends on the layout of your roof and whether you need tilt frames.
    • How much electricity does a 6.6kW solar system generate?
      Ideally, 4kWh of electricity can be generated daily from 1kW of solar panels. As a result, each kW of solar panels may produce 4kWh of electricity daily. So, on a day with plenty of sunshine, a 6.6kW solar system will produce roughly 26.4kWh.
    • What is the payback period of a 6.6kW solar system?
      In Australia, solar energy has a four-year payback period on average. This depends on a number of factors, including the size of the system, how much energy is used each month, and how much sunlight you receive. The actual range is 3 to 5 years, with an average of 4 years.
    • Which is the best brand for solar panels?
      Sunray Solar has partnered with only the leading manufacturers in Australia. Thus, we offer only the best-quality panels so that you get the most out of your investment.

    Install The Best 6.6kW Solar System In Australia

    6.6kW solar systems, or more often seen as 6.6kW solar panels, are becoming more and more widespread in Australian houses for a variety of reasons, such as their affordability, large size, and simplicity of approval for grid connection. If you're thinking about getting a solar panels 6.6 kw installation for your home, let us tell you everything you need to know, including cost, energy returns, and investment appeal. Being one of the best solar company australia, we offer the best installation services to our customers.

    How many 6.6kW solar system panels do you need in the 6.6kW Solar System in Australia?

    Using 330-watt (W) to 400-watt (W) modules, a modern 6.6kW solar system installation Sydney will include 17–20 solar panels. Over the past ten years, this number has drastically decreased. With each panel measuring approximately 1.7 m2, the roof area needed for a 6.6kW solar system NSW will be between 34 and 38 m2, or even larger depending on the layout of your roof and whether tilt frames are needed (which need to be spaced out further than panels put flush on the roof).

    6.6kW solar system price

    Based on the recent track record in Australia, the average price of a 6.6kW solar panel installation Sydney will cost approximately $0.98 per watt or $6,460 after the deduction of federal STC rebate. You can also get in touch to know more about the 6.6 kw solar system with battery price.

    Cost of 6.6kW solar system by the state capital

    Adelaide, SA$5,390
    Canberra, ACT$5,850
    Sydney, NSW$4,940
    Darwin, NT$9,920
    Brisbane, QLD$5,630
    Hobart, TAS$7,440
    Perth, WA$5,320
    Melbourne, VIC$5,570
    Solar panel installation cost, however, differ significantly throughout vendors. Premium items are typically more expensive, but lower affordable 6.6kW solar PV systems made of low-end, less expensive components will cost less overall.

    Do 6.6kW solar modules replace 5kW systems now?

    It's possible that your system has 6.6kW worth of solar panels, but if the suggested inverter for your system only has 5kW, don't be shocked. For a variety of reasons, including the fact that 5kW solar systems are pre-approved for grid connection on nearly all Australian networks, 5kW solar systems are also quite popular there. Consequently, 5kW inverters are far more prevalent than 6kW solar system Sydney. As a result, a large number of 6.6kW solar systems available are "overclocked" systems using a 5kW inverter. According to Clean Energy Council criteria, a 5kW inverter can be overclocked by up to 33% to 6.6kW; however, it cannot reach 7kW, which would necessitate the use of a larger inverter. Better solar energy yields in the morning and late afternoon are among the advantages of this, even if "peak" production is reduced to 5kW in the middle of the day.

    Do you need to add a battery with 6.6kW solar panels?

    A growing number of homes are choosing solar systems with battery storage in mind. If you're thinking about installing batteries now or in the future, the smallest amount we usually advise installing is 5kW; a system of this scale will typically produce plenty of excess energy for storage. 6kW solar system NSW, which is marginally bigger than 5kW, would also be a suitable size for batteries.

    What is the estimated energy output of a 6.6kW solar system?

    The actual power output of a 6kW solar panels system for home can vary depending on several factors. Among these variables are:
    • Location and weather in the area
    • Angle of tilt and orientation of the solar panel array
    • Whether the panels are shaded in any way
    • The functionality of each individual part (mostly the inverter and panels)
    Since the amount of sunlight that strikes a solar system's solar panels directly influences the system's output, location is one of the key factors affecting solar energy yields. A 6kW solar system's estimated energy output is given in the table below, which is based on data from PVWatts and the Bureau of Meteorology. Please be aware that these numbers are merely indicative and that, by assuming a 75% system efficiency rate, we have tried to be conservative in our estimations. Keep in mind that these numbers are averages for the year; in actuality, energy yields will vary from summer to winter.
    CityApprox Solar Energy Production* (per day)
    Brisbane25-27 kWh
    Darwin28-30 kWh
    Sydney22-25 kWh
    Hobart19-22 kWh
    Perth26-28 kWh
    Melbourne21-24 kWh
    Canberra24-27 kWh
    Adelaide24-26 kWh

      Stay In Touch